Pipe Clips
Pipe Stops
Skids
Slide Guides
Ancillary Products
Product Filters:
CPS – Clamped Pipe Stop (Steel)
Designed to assist with the stopping of axial / vertical movement of pipe when used in conjunction with an anchor.
View Product
BOWNUTS
Bow Nuts are made from high tensile steel and are suitable for a variety of applications including both loading and restraint. Normally used with threaded rod and split band clips as a rigid hanger. Available in M10, M12, M16 and M20.
View Product
LWAG – Lightweight Slide Guide
Designed to allow free axial movement of pipe while restricting lateral or vertical movement. These are purposely designed for quick and easy installation along long runs of pipework perfect for intermediates guides where thermal expansion is required. These can be floor or ceiling mounted and are suitable for connections to strut profiles.
View Product
LWSG – Slide Guide (Cu/SS)
Designed to allow free axial movement of pipe while restricting lateral or vertical movement. These are purposely designed for quick and easy installation along long runs of pipework perfect for intermediates guides where thermal expansion is required. These can be floor or ceiling mounted and are suitable for connections to strut profiles.
View Product
PAPD-FA – Anchor Point (Steel)
Designed to stop axial, lateral and vertical movement of pipe. These can be floor, ceiling or wall mounted. Designed with height adjustable to aid installation. Using FPC to avoid having to use Pipe Stops - Up to allowable forces as listed below. <strong>For use on Horizontal Pipe runs only</strong>
View Product
SSC – Bossed Clips (Steel)
Designed to hold pipework and connect to Pipe Anchors, Guides or Skids. Finished in BZP
View Product
SBC – Split Band Clips (Cu/SS)
Designed to hold pipework and connect to Pipe Anchors, Guides or Skids. Finished in EP Black.
View Product
WS-CS – Weldable Pipe Stop
Designed to assist with the stopping of axial and vertical movement of pipe when used in conjunction with an anchor.
View Product
SSC – Bossed Clips (Cu/SS)
Designed to hold pipework and connect to Pipe Anchors, Guides or Skids. Finished in EP Black.
View Product
SLGP – Slide Guide M16 (Steel)
Designed to allow free axial movement of pipe while restricting lateral or vertical movement. These are purposely designed for the challenging application such as primary guides for expansion joints. These can be floor, wall or ceiling mounted.
View Product
SLG-XM – Slide Guide M16 (Cu/SS)
Designed to provide extra movement in axial direction of pipe while restricting lateral or vertical movement. These are purposely designed for the challenging application such as primary guides for expansion joints. These can be floor or ceiling mounted and are suitable for connections to Unistrut.
View Product
SLG-XM – Slide Guide M16 (Steel)
Designed to allow free axial movement of pipe while restricting lateral or vertical movement. These are purposely designed for the challenging application such as primary guides for expansion joints. These can be floor or ceiling mounted and are suitable for connections to Unistrut.
View Product
SLG – Slide Guide M16 (Cu/SS)
Designed to allow free axial movement of pipe while restricting lateral or vertical movement. These are purposely designed for the challenging application such as primary guides for expansion joints. These can be floor, wall or ceiling mounted.
View Product
SLG – Slide Guide M16 (Steel)
Designed to allow free axial movement of pipe while restricting lateral or vertical movement. These are purposely designed for the challenging application such as primary guides for expansion joints. These can be floor, wall or ceiling mounted.
View Product
SLG – Slide Guide M10/M12 (Cu/SS)
Designed to allow free axial movement of pipe while restricting lateral or vertical movement. These are purposely designed for the challenging application such as primary guides for expansion joints. These can be floor or ceiling mounted and are suitable for connections to Unistrut.
View Product
SLG – Slide Guide M10/M12 (Steel)
Designed to allow free axial movement of pipe while restricting lateral or vertical movement. These are purposely designed for the challenging application such as primary guides for expansion joints. These can be floor or ceiling mounted and are suitable for connections to Unistrut.
View Product
SKD – Skid Supports (+/-25mm Movement)
Designed to allow free axial and lateral movement of pipe while restricting vertical lifting movement. These are purposely designed for the challenging application where the pipe is moving in multiple directions like offsets or pipe loops. These can be floor or ceiling mounted and are suitable for connections to Unistrut.
View Product
SKD-XM – Skid Support (+/-50mm movement)
Designed to allow free axial and lateral movement of pipe while restricting vertical lifting movement. These are purposely designed for the challenging application where the pipe is moving in multiple directions like offsets or pipe loops. These can be floor or ceiling mounted and are suitable for connections to Unistrut.
View Product
SKDP – Skid Support Pairs
Designed to allow free axial and lateral movement of pipe while restricting vertical lifting movement. These are purposely designed for the challenging application where the pipe is moving in multiple directions like offsets or pipe loops. These should be ceiling mounted and are suitable for connections to Unistrut.
View Product
SBC – Split Band Clips (Steel)
Designed to hold pipework and connect to Pipe Anchors, Guides or Skids. Finished in BZP.
View Product
PAPi Anchor Point (Cu/SS)
Designed to stop axial, lateral and vertical movement of pipe with a Thermal Break Pad to isolate the pipework from cold bridging. These can be floor, ceiling or wall mounted. Designed with height adjustable to aid installation.
View Product
PAPi Anchor Point (Steel)
Designed to stop axial, lateral and vertical movement of pipe with a Thermal Break Pad to isolate the pipework from cold bridging. These can be floor, ceiling or wall mounted. Designed with height adjustable to aid installation.
View Product
PAPDi-FA Anchor Point (Steel)
Designed to stop axial, lateral and vertical movement of pipe. Thermal break pad included. These can be floor, ceiling or wall mounted. Designed with height adjustable to aid installation. Using FPC to avoid having to use Pipe Stops - Up to allowable forces as listed below. <strong>For use on Horizontal Pipe runs only </strong>
View Product
PAPDi – Anchor Point (Cu/SS)
Designed to stop axial, lateral and vertical movement of pipe. These can be floor, ceiling or wall mounted. Designed with height adjustable to aid installation.
View Product
PAPDi – Anchor Point (Steel)
Designed to stop axial, lateral and vertical movement of pipe. These can be floor, ceiling or wall mounted. Designed with height adjustable to aid installation.
View Product
PAPD – Anchor Point (Cu/SS)
Designed to stop axial, lateral and vertical movement of pipe. These can be floor, ceiling or wall mounted. Designed with height adjustable to aid installation.
View Product
PAPD – Anchor Point (Steel)
Designed to stop axial, lateral and vertical movement of pipe. These can be floor, ceiling or wall mounted. Designed with height adjustable to aid installation.
View Product
PAP Anchor Point (Cu/SS)
Designed to stop axial, lateral and vertical movement of Copper and Stainless pipes. These can be floor, ceiling or wall mounted. Designed with height adjustable to aid installation.
View Product
MPC – Multi Purpose Channel
For applications where the pipework is set away from the wall - Use the MPC to bridge the gap. Purposefully design to be used with both Anchors and Slide Guides. Designed to work in conjunction with; <ul> <li>PAP anchors.</li> <li>PAPD Anchors</li> <li>SLG M10/M12/M16</li> </ul> These can be floor, ceiling or wall mounted.
View Product
PAP Anchor Point (Steel)
Designed to stop axial, lateral and vertical movement of pipe. These can be floor, ceiling or wall mounted. Designed with height adjustable to aid installation.
View Product
LWSG – Slide Guide (Steel)
Designed to allow free axial movement of pipe while restricting lateral or vertical movement. These are purposely designed for quick and easy installation along long runs of pipework perfect for intermediates guides where thermal expansion is required. These can be floor or ceiling mounted and are suitable for connections to strut profiles.
View Product
LWPG – Slide Guide (Cu/SS)
Designed to allow free axial movement of pipe while restricting lateral or vertical movement. These are purposely designed for the challenging application such as primary guides for expansion joints. These can be floor or ceiling mounted and are suitable for connections to strut profiles.
View Product
LWPG – Slide Guide (Steel)
Designed to allow free axial movement of pipe while restricting lateral or vertical movement. These are purposely designed for the challenging application such as primary guides for expansion joints. These can be floor or ceiling mounted and are suitable for connections to strut profiles.
View Product
LWFA Anchor Point (Cu/SS)
Designed to stop axial, lateral and vertical movement of pipe. These can be floor or ceiling mounted and are suitable for connections to Strut profiles.
View Product
LWFA Anchor Point (Steel)
Designed to stop axial, lateral and vertical movement of pipe. These can be floor or ceiling mounted and are suitable for connections to Strut profiles.
View Product
FPC – Bossed Clip (Steel)
Designed to hold pipework and connect to Pipe Anchors. For high loads and when used with PAPD anchor. Finished in BZP
View Product
ADP – Thread Adapters
Thread connections for use with threaded rods or bolts. Designed to strongly connect two different sized threads.
View ProductCPS – Clamped Pipe Stop (Cu/SS)
Designed to assist with the stopping of axial / vertical movement of pipe when used in conjunction with an anchor.
View ProductLooking for a bespoke solution?
Maybe a bespoke solution is what you need?